diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
index c9d7559..cbd0c8b 100644
--- a/arch/mips/dts/Makefile
+++ b/arch/mips/dts/Makefile
@@ -17,6 +17,7 @@
 dtb-$(CONFIG_BOARD_COMTREND_VR3032U) += comtrend,vr-3032u.dtb
 dtb-$(CONFIG_BOARD_COMTREND_WAP5813N) += comtrend,wap-5813n.dtb
 dtb-$(CONFIG_BOARD_HUAWEI_HG556A) += huawei,hg556a.dtb
+dtb-$(CONFIG_BOARD_MT7628_RFB) += mediatek,mt7628-rfb.dtb
 dtb-$(CONFIG_BOARD_NETGEAR_CG3100D) += netgear,cg3100d.dtb
 dtb-$(CONFIG_BOARD_NETGEAR_DGND3700V2) += netgear,dgnd3700v2.dtb
 dtb-$(CONFIG_BOARD_SAGEM_FAST1704) += sagem,f@st1704.dtb
diff --git a/arch/mips/dts/mediatek,mt7628-rfb.dts b/arch/mips/dts/mediatek,mt7628-rfb.dts
new file mode 100644
index 0000000..6ff36da
--- /dev/null
+++ b/arch/mips/dts/mediatek,mt7628-rfb.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ *
+ * Author: Weijie Gao <weijie.gao@mediatek.com>
+ */
+
+/dts-v1/;
+
+#include "mt7628a.dtsi"
+
+/ {
+	compatible = "mediatek,mt7628-rfb", "ralink,mt7628a-soc";
+	model = "MediaTek MT7628 RFB";
+
+	aliases {
+		serial0 = &uart0;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+};
+
+&pinctrl {
+	state_default: pin_state {
+		pleds {
+			groups = "p0led", "p1led", "p2led", "p3led", "p4led";
+			function = "led";
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	num-cs = <2>;
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <25000000>;
+		reg = <0>;
+	};
+};
+
+&eth {
+	mediatek,wan-port = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ephy_router_mode>;
+};
+
+&mmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd_router_mode>;
+
+	status = "okay";
+};
diff --git a/arch/mips/mach-mtmips/Kconfig b/arch/mips/mach-mtmips/Kconfig
index 5a5f2e3..60cc0f8 100644
--- a/arch/mips/mach-mtmips/Kconfig
+++ b/arch/mips/mach-mtmips/Kconfig
@@ -79,6 +79,14 @@
 	  ethernet ports, 1 USB port, 1 UART, GPIO buttons and LEDs, and
 	  a MT7688 (PCIe).
 
+config BOARD_MT7628_RFB
+	bool "MediaTek MT7628 RFB"
+	depends on SOC_MT7628
+	help
+	  The reference design of MT7628. The board has 128 MiB DDR2, 8 MiB
+	  SPI-NOR flash, 1 built-in switch with 5 ports, 1 UART, 1 USB host,
+	  1 SDXC, 1 PCIe socket and JTAG pins.
+
 endchoice
 
 config SPL_UART2_SPIS_PINMUX
@@ -90,6 +98,7 @@
 	  (shared with SPIS) rather than the usual GPIO 20/21.
 
 source "board/gardena/smart-gateway-mt7688/Kconfig"
+source "board/mediatek/mt7628/Kconfig"
 source "board/seeed/linkit-smart-7688/Kconfig"
 
 endmenu